1.5 Amp Premium HO Scale Decoder with Digitrax Easy Connect 9-Pin To DCC Medium Plug 3.0" Harness
Digitrax Easy Connect 9 Pin Harness
- 1.5 Amp/2 Amp Peak Current Rating
- 6 FX3 Functions, 0.5 Amp Total Function Current Rating
- ▪FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- FX3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving.
- FX3 effects optimized for selectable LED or lamp operation
- Configurable FX3 Pulse Function available on all function outputs.
- Function Remapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls
- Digitrax LocoMotion® System-Your locomotives look like the real thing. The Digitrax LocoMotion System makes them run like the real thing, too!
- Torque Compensation for smooth as silk silent operation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
- Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
- Series 6 Decoder Features.
- 2 Digit and 4 Digit Addressing.
- ▪Basic, Advanced & UniVersal Consisting.
- SuperSonic motor drive for silent operation.
- Scaleable Speed Stabilization (Back EMF) for smooth operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- DCC Compatible.
- FCC Part 15, Class B RFI compliant.
- Digitrax “No Worries” Warranty.
- DCC Medium Plug Long Harness
- With DCC medium 8 pin plug to Digitrax 9 pin JST type Decoder Plug. Long Harness with 3.5" (88mm) wires.
- The decoder end of the harness plugs in to a DTX9 socket allowing the decoder to be detached from the harness.
- The locomotive end of the harness allows for use with all locomotives with a DCC medium 8 pin plug socket.
- The green wire is not attached to the DCC medium plug but is available for use as an additional wired function lead.
Product Condition: New
Product Type: Model Train > model train control > DCC Decoders
Dimensions (L x W x H):
.672" x 1.074" x .259" (17.08mm x 27.28mm x 6.6mm)