The Western Depot The Western Depot The Western Depot
  Top » Catalog » Model Train Controls » DCC » 73400 Log In  |  My Account  |  Cart Contents  |  Checkout   
LokSound Select 6 AUX Universal Sound decoder
 Our Price: $109.95
Product Manufacturer: ESU LLC
Manufacturer Model: 73400
Store Item Number: ESU73400
Quantity In Stock: 5
 
LokSound Select 6 AUX Universal Sound decoder
Click to enlarge

LokSound Select 6 AUX Universal Sound decoder
ready for programming

We are proud to present to you the brand-new LokSound Select decoder. The LokSound Select decoder was designed with all our past experience, while considering many suggestions of ESU users.

The LokSound Select is a versatile DCC & DC “Dual Mode” decoder integrating a full-featured, 8 channel sound system, six lighting outputs and a 1.1A motor controller. While the LokSound Select only measures 1.18” x 0.59” (30mm x 15mm), due to its unique thermal design, it does (like all genuine LokSound decoders) not need any heat sinks.

We ship the LokSound Select with an 8 pin NMRA connector to make it a “plug & play” decoder. It also contains on board capacitance for smooth operation. For LokSound Select, we offer a comprehensive range of new high-power speakers, rated 4 Ohms.

The LokSound Select can be used on conventional “analog” layouts and controlled with a DC power pack, but to benefit from all its features, we highly recommend DCC operation.

The LokSound Select follows all NMRA DCC standards and recommended practices. It can be used with 14, 28 or 128 speed steps, supports two digit (7 bit addresses) as well as “4-digit” addressing. Up to 29 function keys are supported. The LokSound Select can change between DC and DCC operation at any time “on the fly”.

Of course, the LokSound Select supports all DCC-programming modes including Programming on the Main Track (“POM”). Because of its unique low-power design, the LokSound Select can be programmed on the programming track of all popular DCC systems. No programming track boosters or other circuitry will be needed.

By the use of our LokSound Programmer, programming can be even more comfortable by using your computer to adjust the many CVs and settings. Sound

The LokSound Select comes with a 32 MBit memory chip. The sounds stored therein are our own recordings which were made by using the latest recording equipment and have been digitally re-mastered for the best audio possible. The sounds are transferred to a class “D” audio amplifier via eight polyphonic sound channels. LokSound Select decoders offer the following unique features:

  • Multiple whistle and horns: Each LokSound Select offers many whistle & horns. By just changing one CV, you can select your favorite one. This allows an easier adjustment to your model.
  • Playable whistle: The LokSound Select supports a very fast responding whistle function. By just pressing your throttle‘s button, you can really blow the whistle like the real engineer.
  • 8 channel sound: The LokSound Select can playback up to 8 sounds at the same time. This will result in the most realistic experience available today.
  • Synchronized brake squeal: The LokSound Select will synchronize the brake squeal sound with the real movement of the locomotive. No longer will stopped trains have the brake sound still on!
  • Manual notching: The diesel speed steps can be either manually controlled by function keys or automatically based on the speed.
  • Individual volume control: The volume of all sound effects can be adjusted individually.

Steam decoders can produce over 20 sound effects, including the bell, air pump, exhaust chuff, coupler, steam release, cylinder cocks, brake release, side rod clank, blower, injector, Fireman Fred and many more. Synchronizing the steam chuff rate by using two CVs only virtually eliminates the need for a cam, but can of course be connected.

Diesel decoders can produce over 20 sound effects, including the engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes, fans, brake squeals, coupling and uncoupling, detector sounds, rail clank and many more.

Unlike other manufacturers, LokSound Select offers you two options to customize your engine. The most simple is by using one (!) CV. You can select the prime mover sound, the desired whistle or horn and the bell. Each LokSound Select offers various options on that.

However, if you are still unsatisfied with the result, you may at any time use the famous LokSound Programmer to download new sounds into the LokSound Select. We offer numerous “ready-made” sound packages for easy downloading.

ESU offers load compensation (using B-EMF) since 1999. While other manufacturers seem only to focus on the sound options, the LokSound Select offers the 5th generation of motor control resulting in a smooth and precise locomotive operation. We at ESU believe that good motor control is mandatory for model trains: Even the best sound is worthless if the locomotive running is not smooth!

Regardless if you are using coreless or conventional DC motors, the LokSound Select’s unique auto-detection function can measure the characteristics and adjust the internal settings. There is no need to fiddle around with many CVs to adjust to the engine. Due to Dynamic Drive Control (DDC) you can limit the influence of the load control and operate really smoothly around the depot and over turnouts, while on the main, when going uphill the engine prototypically slows down.

Each LokSound Select include 6 (!) outputs with 0.25A current for H0 Decoders (0.18A for the "Micro Decoders") that can be allocated individually to a light effect, which simulates the light patterns of many popular warning beacons. Besides D312 Rotary beacon, strobe and alternate flashing, there is a firebox flicker, smart flicker, Mars light, Gyralight, Ditch lights (two types), Oscillating Headlights, Stratolight and many more.

The Rule 17 dimmable headlight can be either controlled automatically or by function button. A LED brightness correction feature now also allows using LEDs for lighting effects. This is an important feature since LEDs do behave different than bulbs.

All function outputs and the motor connection are protected against overload and short-circuit. We want you to enjoy your LokSound decoder as long as possible.

LokSound Select decoders are firmware-updatable. This means, the internal decoder software can be replaced by new versions, if necessary. For this, you only need an ESU LokSound Programmer and a PC.

Product Condition: New

Product Type: Model Train → model train control → DCC Decoders

This product was added to our catalog on Tuesday 28 June, 2016.

Reviews

Quick Find

Category:

Manufacturer:

Product Type:

Scale:

Railroad:


Use keywords and/or menus to find the product you are looking for or else use…
Advanced Search
Categories
Trains
Train Sets
Model Train Controls
  DC Train Controls
  DCC
    Digitrax
    North Coast Engineering
    TCS
  Legacy / DCS / TMCC
  O Gauge Traditional AC Controls
Electrical Items
Books / Videos / Other Media
Scenery Supplies
Tools
Slot Cars
Plastic Models
Board Games
Odds & Ends
Advertised Specials
Gift Certificates
Toys
Used Items
Specials
Newest Products
Go To...
Manufacturers
Information
Shipping & Returns
Preorders
Privacy Notice
Contact Us
Events Schedule
F.A.Q.
Visit Our Store
About Us
Custom Made Trains
Locomotive Instructions
Links
Site Map
Facebook Page
Credit Cards
We Accept:
Visa
MasterCard
Discover
American Express
Shopping Cart more
0 items
Manufacturer Info
ESU LLC
ESU LLC Homepage
Other products
Product Question
Send us a question about this product.
Send us a question about this product.
Notifications more
NotificationsNotify me of updates to LokSound Select 6 AUX Universal Sound decoder
What’s New? more
Burlington Northern SD60M #9282
Burlington Northern SD60M #9282
$170.98
Tell A Friend
 
Tell someone you know about this product.
Reviews more
Write ReviewWrite a review on this product!

Home | Contact Us | About Us | Location | Custom Trains | Trains | Advertised Specials | All Specials

Copyright © 2018 The Western Depot
1650 Sierra Avenue, Suite 203
Yuba City, CA 95993-8986
530-673-6776

Powered by a very highly modified version of osCommerce.